Accreditations

Fenestration and Glazing Industry Alliance (FGIA) Accredited

AAMA 501.1 Test Method for Water Penetration of Windows, Curtain Walls, and Doors Using Dynamic Pressure
AAMA 501.2 Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems
AAMA 501.4 Testing Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drift
AAMA 501.5 Test Method for Thermal Cycling of Exterior Walls
AAMA 501.7 Test Method for Evaluating Windows, Window Wall, Curtain Wall and Storefront Systems Subjected to Vertical Interstory Movement
AAMA 501.8 Test Method for Determination of Resistance to Human Impact of Window Systems Intended for Use in Psychiatric Applications
AAMA 502 Voluntary Specification for Field Testing of Newly Installed Fenestration Products
AAMA 503 Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls and Sloped Glazing Systems
AAMA 513 Test Method for Determining Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces
AAMA 910 Voluntary Life Cycle Spec and Test Methods for Architectural Grade Windows and Sliding Glass Doors
AAMA 920 Specification for Operating Cycle Performance of Active Side-Hinged Exterior Door Slabs
AAMA 925 Specification for Determining the Vertical Load Resistance of Side Hinged Doors
AAMA 930 Voluntary Specification for Water Penetration Resistance and Structural Load Performance of Locking/Latching Hardware
AAMA 1304 Voluntary Specification for Force Entry of Side Hinged Door Systems
AAMA 1503 Voluntary Test Method for Thermal Transmittance and CR of Windows, Doors and Glazed Wall
ANSI Z97.1 Specification for Safety Glazing Materials Used in Buildings
ASTM E283 Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM E330 Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E331 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E547 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM E783 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
ASTM E987 Test Methods for Deglazing Force of Fenestration Products
ASTM E1105 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform of Cyclic Static Air Pressure Difference
ASTM E1233 Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
ASTM E1886 Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
ASTM E2068 Test Method for Determination of Operating Force of Sliding Windows and Doors
ASTM F588 Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
ASTM F842 Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

International Accreditation Service (IAS) Accredited

AAMA 450 Voluntary Performance Rating Method for Mulled Fenestration Assemblies
AAMA 501.1 Test Method for Water Penetration of Windows, Curtain Walls, and Doors Using Dynamic Pressure
AAMA 501.2 Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems
AAMA 501.4 Testing Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drift
AAMA 501.5 Test Method for Thermal Cycling of Exterior Walls
AAMA 501.7 Test Method for Evaluating Windows, Window Wall, Curtain Wall and Storefront Systems Subjected to Vertical Interstory Movement
AAMA 502 Voluntary Specification for Field Testing of Newly Installed Fenestration Products
AAMA 503 Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls and Sloped Glazing Systems
AAMA 508 Voluntary Test Method and Specification for Pressure Equalized Rain Screen Wall Cladding Systems
AAMA 509 Voluntary Test and Classification for Drained and Back Ventilated Rain Screen Wall Cladding Systems
AAMA 513 Test Method for Determining Forces and Motions Required to Activate Operable Parts of CW and AW Class Operable Windows, Sliding Glass Doors and Terrace Doors in Accessible Spaces
AAMA 515 Voluntary Procedure for Determination of Fenestration Surface Temperatures by THERM Finite Element Modeling
AAMA 520 Voluntary Specification for Rating the Severe Wind-Driven Rain Resistance of Windows, Doors, and Unit Skylights
AAMA 910 Voluntary Life Cycle Specification and Test Methods for Architectural Grade Windows and Sliding Glass Doors
AAMA 1304 Voluntary Specification for Force Entry of Side Hinged Door Systems
AAMA 1503 Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections
AAMA 1701.2 Voluntary Standard for Utilization in Manufactured Housing for Primary Windows and Sliding Glass Doors
AAMA 1702.2 Voluntary Standard for Utilization in Manufactured Housing for Swinging Exterior Passage Doors
AAMA 1704 Voluntary Standard Egress Window Systems for Utilization in Manufactured Housing
AAMA/WDMA/CSA 101/I.S.2/A440 North American Fenestration Standard/Specification for Windows, Doors, and Skylights
AMCA 540 Test Method for Louvers Impacted by Wind Borne Debris
AMCA 550 Test Method for High Velocity Wind Driven Rain Resistant Louvers
ANSI/DASMA108 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference
ANSI/DASMA115 Standard Method for Testing Sectional Doors, Rolling Doors, and Flexible Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure
ASTM C1060 Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
ASTM C1199 Standard Test Method for Measuring the Steady State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
ASTM C1363 Standard Test Method for Thermal Performance of Building Material and Envelope Assemblies by Means of Hot Box Apparatus
ASTM C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D7877 Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
ASTM D8231 Use of Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes
ASTM E72 Standard Test Methods of Conduction Strength Tests of Panels for Building Construction
ASTM E283 Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM E330 Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E331 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E547 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM E661 Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
ASTM E 779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E783 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
ASTM E907 Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
ASTM E935 Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
ASTM E987 Test Methods for Deglazing Force of Fenestration Products
ASTM E1105 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform of Cyclic Static Air Pressure Difference
ASTM E1186 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
ASTM E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
ASTM E1748 Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
ASTM E1886 Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
ASTM E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
ASTM E2068 Test Method for Determination of Operating Force of Sliding Windows and Doors
ASTM E2268 Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
ASTM E2353 Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
ASTM E2357 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
ASTM F588 Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
ASTM F842 Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
ASTM F2006 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
ASTM F2090 Standard Specification for Window Fall Prevention Devices with Emergency Escape (Egress) Release Mechanisms
CRF, Title 10, Chapter II, Subchapter D, Park 431, Subpart R, Appendix A Walk-in Coolers and Walk-in Freezers
CSA A440-S1 American Fenestration Standard/Specification for Windows, Doors, and Skylights
FM Global 1-52 Field Verification of Roof Window Uplift Resistance
ICC 500 Standard for Design and Construction of Storm Shelters, Test Methods for Impact and Pressure Testing, Chapter 8 only
ANSI/NFRC 100 Procedure for Determining Fenestration Product U-factors
NFRC 102 Procedure for Measuring the Steady-State Thermal Transmittance of Fenestration Systems
ANSI/NFRC 200 Determining Fenestration Product Solar Heat Gain Coefficient
ANSI/NFRC 500 Fenestration Product Condensation Resistance
NHTSA/FMVSS 49 CFR 571.217 Standard No. 217 Bus Emergency Exits and Window Retention and Release
TAS 100A Test Procedure for Wind and Wind Driven Rain Resistance and/or Increased Windspeed Resistance of Soffit Ventilation Strip and Continuous or Intermittent Ventilation System Installed at the Ridge Area
TAS 201 Impact Test Procedures
TAS 202 Criteria for Testing Impact & Nonimpact Resistant Building Envelope Components Using Uniform Static Air Pressure
TAS 203 Criteria for Testing Products Subject to Cyclic Wind Pressure Loading
WDMA 1.S.11 Industrial Standard for Analytical Method for Design Pressure Rating of Fenestration Products

Miami Dade County Approved Test Laboratory

- TAS 100(A) Test Procedure for Wind and Wind Driven Rain Resistance and/or Increased Windspeed Resistance of Soffit Ventilation Strip and Continuous or Intermittent Ventilation System Installed at the Ridge Area
- TAS 201 Impact Test Procedures
- TAS 202 Criteria for Testing Impact & AMp, Nonimpact Resistant Building Envelope Components Using Uniform Static Air Pressure
- TAS 203 Criteria for Testing Products Subject to Cyclic Wind Pressure Loading
- ASTM E1886 Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
- ASTM E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
- ASTM E2068 Test Method for Determination of Operating Force of Sliding Windows and Doors

National Fenestration Rating Council (NFRC) Accredited

Simulation Laboratory
Testing Laboratory
Independent Approved Calculation Entity
NFRC 102 Procedure for measuring the steady-state thermal transmittance of fenestration systems
NFRC 400 Air Test
NFRC 100/200/500 NFRC Simulation Window 6/7 & THERM 6/7
NFRC 100/200/500 NFRC Simulation CMA
NFRC 100/200/500 NFRC Simulation ACE

Other Standards & Test Procedures

AAMA 501 Methods of Test for Exterior Walls
AAMA 501.9 Surface Temperature Assessment for Condensation Evaluation of Exterior Wall Systems
AAMA 506 Voluntary Specification for Impact and Cycle Testing of Fenestration Products
AAMA 508 Voluntary Specification for Pressure Equalized Rain Screen Wall Cladding Systems
AAMA 509 Voluntary Test and Classification Method for Drained and Back Ventilated Rain Screen Wall Cladding Systems
AAMA 511 Voluntary Guideline for Forensic Water Penetration Testing of Fenestration Products
AAMA 514 Test Method for Static Loading and Impact on Exterior Shading Devices
AAMA 515 Voluntary Procedure for Determination of Fenestration Surface Temperatures by THERM Finite Element Modeling
AAMA 1302.5 Voluntary Specification for Forced Entry Resistant Aluminum Prime Windows
AAMA 1303.5 Voluntary Specification for Forced Entry Resistant
ASTM E2128 Standard Guide for Evaluating Water Leakage of Building Walls
ASTM E2358 Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
ANSI/NFRC 400 Procedure for Determining Fenestration Product Air Leakage
ANSI/NFRC 507 Standard Practice for Determining the Thermal Performance Characteristics of Fenestration Systems in Commercial Buildings
NYC DOHMH Window Guards